Call us now on 01993 840077 steve@binderysolutions.co.uk

ondemandlogo

Quality cases for digital books and photo albums

The ODM Modular Casemaking system comprises gluing unit (Spreader) which applies a fine layer of cold adhesive to the upper side of the sheet. The sheet is transferred to the board positioning unit (Slider). The board and spine piece are positioned using the gauge and the assembly is transferred to the edge turning unit (Stomper) where each edge is folded over in turn to complete the case. The case then passes through the rotary press (Squeezer) to ensure good quality finish. This unit can also be supplied with hot animal glue as an option. One or two operators can man this system depending on production requirements.

Specification:

  • Max case size: 460 x 760mm Hot and cold glue
  • Max case size for XXL: 610 x 1200mm Hot and cold glue
  • Minimum case size: 101mm Sq
  • Single Phase
  • Lining also possible
  • Hot Glue option

 

Slider

Slider

Spreader

Spreader

Stomper

Stomper

Squeezer

Squeezer

ODM Slicer

Slicer

Slicer

  • Cuts perfect corners for casemaking
  • Knife blade safety guard
  • Hand-operated
  • Optional table stand
  • Surface area: 381X610mm
  • Knife (blade width): 76mm
  • Stack height: 25mm

 

.

.

 

IML DA 2002 Semi Automatic Casemaker

The DA 2002  is complete with gluing station with pre-melter, glue roller, glue pump and viscosity control unit with automatic water supply. This semi-automatic casemaker is designed for production of 3-piece book covers and one-piece cases for ring binders, letter files, etc. On request additional guides can be supplied for the production of 4, 5 or more pieces. Working table with register guide for cover material and boards placed at the operator side for more ergonomic operation. Accurate folding of even the most difficult materials such as photographic paper is achieved through a set of 3 pressing rollers.
.
  • Case size max: 1100 mm x 500 mm*
  • Min: 120 x 120 mm (one-piece)/120 mm x 262 mm (3 pcs)
  • Board thickness: min 1.8mm / max 4 mm **
  • Mechanical speed:  up to  4 cycles per minute;
  • Electrical specs: 400 V/N/ 3ph 50/60 Hz plug 32 Amp
  • Power requirements: max 5,5 Kw;
  • Compressed air req: 300 Nl/min @ 6 bar
  • Net weight of machine: kg 600

.

*   gluing station and vacuum table only max size : 700 x 1100 mm
** with special modification max thickness: 10mm (optional)

.

.

For further information see HERE